How to make a call bar 2. How to block incoming calls from unknown subscribers and from hidden numbers on the iPhone

1. How to disable the prohibition of incoming calls Megaphone
2. Call barring codes on Megaphone
3. Features of the service call barring Megafon
4. How to block calls from unknown or undefined numbers
5. What solution do you use?

When using a mobile phone, you must be careful and carefully enter the numbers for calls. A mistake in one digit can lead to making a call to another city or even to another country. The same applies to roaming, where the rates for communication are quite serious. In order not to make a particular call by accident, you should use the Call Barring service from MegaFon. In this review, you will get maximum information about this useful service.

“Call barring” on MegaFon cannot be called the most popular service. Most subscribers do not even know about it. However, it can benefit by protecting the caller from making high cost calls . Error in one digit often costs a lot, especially if you accidentally call abroad - this is an extremely expensive direction. And to return the money spent by chance will be problematic.

In order to prevent loss Money due to an incorrectly dialed number, the following steps must be taken:

• Record all the important numbers in your phone book - Yes, some people manage to dial numbers in the old-fashioned way, in manual mode;
• Before making a call to check the correct dialing;
• Use the “Call barring” from MegaFon.

Yes, if the numbers are entered in the phone book, it will be simply impossible to make a mistake - only if the phones are clogged correctly and without errors. Control of their actions is also very important, as carelessness and carelessness cause loss of funds. Well, the service, which will be discussed further, will allow you to feel additional peace of mind when performing any operations with your phone.

The “Call barring” service from MegaFon will allow you to avoid unexpected expenses when making voice and some other calls. It blocks network dialing. That is, even if you move the SIM card to another phone, the installed locks will remain . Few people know about the existence of this service, but it is implemented in cellular networks GSM standard almost from the day of their appearance.

“Call barring” from MegaFon allows you to block the following types of calls - we give them along with the codes:

• All outgoing (code 33) - with such settings it is impossible to call somewhere;
• International calls (code 331) is a good way to bar the most expensive direction of communication;
• International calls in international roaming (code 332) - they are characterized by the maximum cost, and they can also be banned;
• All incoming calls (code 35) is a great opportunity to fully protect yourself from calling subscribers;
• International roaming (code 351) is another way to save money.

Calling restrictions are also provided - these are regular voice calls, data calls and fax calls. Here are the prohibition codes:

• Code 10 - all types of calls are prohibited, except for calls to 112;
• Code 11 - voice communication in both directions is prohibited, except for calls to 112;
• Code 13 - prohibition of facsimile messages;
• Code 16 is a ban on sending “data” and text messages, there are fax and voice calls in operation.

Let's now go over the practical side of the issue.

It is time to discuss how to use bans and their codes. They are sent to the network in the form of simple commands . For example, to bar all calls, send the command * barcode_code * password #. If you need to prohibit a certain type of calls, the command syntax will be as follows - * barcode_code * password * call_type #. The default password is 1111 (you can change it).

Let's take a look at how to bar incoming calls on MegaFon. To do this, dial the code * 35 * 1111 #. If you need to ban incoming international roaming, send the command * 351 * 1111 #. In order to activate the prohibition of outgoing calls on MegaFon, we dial the command * 33 * 1111 # - now it will be impossible to call somewhere. To prohibit outgoing calls like “fax”, dial * 35 * 1111 * 13 #.

In order to disable call barring on MegaFon, you should replace the first asterisk with the pound symbol. For example, to deactivate the ban on all outgoing calls, you need to use the command # 35 * 10 #.

Please note that the Call Barring service is provided absolutely free of charge and without any charge for sending commands . To manage the service, you can use the call settings menu in your mobile phone or smartphone.

The service from Megafon - call barring allows you to avoid accidentally dialing certain numbers (in the case of outgoing calls) and limit the number of incoming calls, for example, setting a ban on all incoming calls, only international calls , prohibition of incoming fax data.
This option is provided. mobile operator free of charge. To use the service, you must enter a special password (the default is 1111). If it is necessary to change the password, type the following combination - "** 03 * 330 * valid password * new password * repeat new password #" and press the call key. To check the set mode, enter the code "* # service code #", and the call.

If you have an IMPORTANT or very URGENT question, ask !!!

We suggest that you familiarize yourself with the basic combinations that allow you to switch to call barring. About the codes that should be entered in these combinations, we describe a little below. So:
1. To set restrictions on all types of calls, enter - "*" barring code "*" password "#";
2. To restrict a certain type of calls, enter the code - "*" barring code "*" password * type of call "#".
After entering the above combinations, do not forget to press the call button.

How to disable the prohibition of incoming calls Megaphone

To disable the prohibition of inbound, use the following combinations:
1. To disable the ban on any types of calls, dial "#" barring code "*" password "#";
2. To disable the ban on the established type of calls, dial - "#" barring code "*" password * type of call "#".
As in the previous cases, after any combination, press the call key.

Call barring codes on Megaphone

1. Outgoing calls
all calls - 33;
international outgoing of a specific country - 331;
Outgoing only in the Russian Federation and within its borders, while in roaming - 332.
2. Incoming calls
all - 35;
only incoming on the Megafon network, and only in the Russian Federation - 351.
When entering combinations, you can specify the following types of calls:
barring all types of calls - 10;
all voice calls barred - 11;
prohibition of receiving / sending facsimile data - 13;
banning text messages and other data - 16.
In the first two cases, the restriction will be set for the specified calls, except for the help desk number.

Features of the service call barring Megafon

This option will not work if call forwarding is enabled on your mobile phone. To activate the prohibition of incoming calls Megaphone, or outgoing calls, you must first disable any forwarding. Activation of the option to bar all calls will be possible if the operator’s forwarding is set on your phone (the "Who called" option).

IMPORTANT: Information on this site is provided for informational purposes only and is current at the time of this writing. For more accurate information on specific issues, contact the official operators.

Read this article to the end and you will learn why you need a ban on outgoing calls and how to turn it on yourself. Practical application of the service "bar outgoing calls" can be found mass.

For example, you do not want to make outgoing long-distance or international calls from your number (because the fare is expensive) or you are afraid that a child will accidentally call the wrong person, etc. Why use this service everyone is able to decide for himself. I will tell you how to use this service.
There are several ways to connect the Barring outgoing calls:

In the phone menu - settings - calls - call barring. Depending on the manufacturer of the telephone, this item may be located elsewhere, but for the most part it is there. If you have any difficulties with determining the location of this item - refer to the user manual (you can find it in the box from the phone or on the Internet).

Outgoing calls can be barred with universal (for any operator) commands. To do this, type the appropriate command on the phone and press the call key. List of commands at the end of the article.

Another way to protect your phone from unwanted outgoing calls is to set a password on the phone. Without knowledge of the password, you cannot make an outgoing call, incoming calls can be received (conveniently in case of theft / loss of the phone, since this device will not be of particular value, but you can get a reward for it). By the way, on some phones you can set a password for outgoing calls, that is, you can enter the phone menu, but you cannot call without a password. An interesting use of this function was found by one of my friends - he asked the spouse before going to the bar to set a password for outgoing calls, so as not to call someone drunk :)
Some operators offer services to restrict outgoing calls - for example, you can limit calls at a certain time, by duration, by the territory from which the call is made, etc. etc. These services have a multi-faceted service with a specific focus, each operator functions in its own way, so I will not describe in detail in this article.

There are not many possibilities to bar outgoing calls

As incoming, all the same, we buy a phone to call, so that's all. If the article was interesting to you - leave a comment, please.

To prohibit outgoing calls using the commands type:

* 33 * password # - barring all outgoing calls (default password is 0000), disable - # 33 * password #

* 331 * password # - prohibition of international calls, disconnection - # 331 * password #

I feel that our civilization has already evolved to that stage of its development, when we do not respond to incoming call on mobile device from unknown number or subscriber. All calls from unknown subscribers or from hidden numbers fall into voice mail or answering machine. But this process is done manually. And how can you automate this process?
This will mean an end to calls from automated dialing systems (for example, collectors). Is not that great?

How to block calls from unknown or undefined numbers

We already know how to manually block the number. The proposed method is more sophisticated and uses a clever, more sophisticated way, where we use the capabilities of this largely underestimated function "Do not disturb."

After enabling this feature, your iPhone will not ring or vibrate when someone who is not registered in the phone contacts application on your mobile device calls you.

Step 1: Open the Settings app on your iPhone and select Do Not Disturb.

Step 2: Turn on the “Manual” switch. This action activates the Do Not Disturb feature. You will see a crescent icon in the status bar.

Step 3: Click on “Call admission from” . Now you need to decide from whom to receive calls, and from whom to block incoming calls. If you select “From Favorites” , then all calls from subscribers from your Favorites list will be received by your device (say, from your family members or from friends). If you select "All contacts" , then all subscribers from your contact list will be able to reach you. The last option seems to be the best solution, since you will not miss a call from people who are really registered in your contact book.

That's all. Enjoy the serenity.

What solution do you use?

Have you tried using third-party applications to solve this problem? Or used the built-in iOS solution? Mobile system iOS 10 promised us a world free of spammers, thanks to CallKit. For me personally, all these applications have never worked properly.